The problem with Windows 10’s full-screen mode is not new. Some consumers are concerned that their display does not appear in full-screen mode after updating to Windows 10.

A small black bar appears on the left-hand side of the monitor, preventing it from appearing in full-screen mode. This problem occurred with your video card drivers or your display configuration.

Full-screen mode in Windows 10 is a useful feature that may be applied to a variety of situations. Usually, it is used for gaming, writing, and reading.

One of the Windows 10 shortcuts allows you to quickly go to full-screen mode, no matter what you are doing on your computer or device.

You can utilize a full screen for a separate display if you have 2 monitors, also it will work on your laptop too.

5 Best Methods To Go Full-Screen Mode on Windows 10

I’ll walk you through some methods of going full screen on a computer.

Method 1: Using Your Keyboard

Generally speaking, the F11 key is the standard full display shortcut for Windows 10 and other browser editions, including Chrome Browser and other common browsers like Microsoft Edge.

Furthermore, while in full-screen mode, it obscures items like the Address bar and other distracting elements from view, allowing you to concentrate on the online content itself.

Exiting full-screen mode is likewise a simple and quick process. All you have to do now is press the F11 key again. If you do this, you will be taken out of full-screen mode.

When display space is limited, and you require a small amount of software on your display, hit ALT+ENTER for Windows OS or CMD+ENTER for Mac OS.

The application will expand to fill the whole screen, concealing the menu bar, toolbar, and title bar in the process.

Method 2: Change Display Settings

Sometimes your display settings might be affected by a Windows update or other factors, resulting in the appearance of black bars on the sides of your monitor. As a result, you will need to adjust your display settings to resolve the issue.

Step 1: Navigate to the Desktop, right-click, and select Display settings.

Step 2: First of all, ensure that your scale is set to 100%. If you are running an older version of Windows 10, you will notice a slide at the top of the Display panel that you may click on. Please make it 100%.

Step 3: For those of you who are running the most recent version of Windows 10, you would be able to see a drop-down list under the heading ‘Scale and layout.’ Please make certain that it is 100 percent accurate.

Step 4: As soon as you have corrected your scaling, click on the drop-down option under Resolution and experiment with other resolutions to see if this resolves your problem.

Pro Tip: If you are using television as your monitor, you may further isolate the problem by adjusting the Aspect ratio of your television to ‘Screen Fit’ or ‘Full 100 percent’ from the TV’s configuration menu.

Method 3: Reinstall Your Display Driver

Sometimes, the reason behind the problem is the video adapter driver. As a result, you will need to replace your adapter driver to eliminate this possibility.

Step 1: Navigate to the Start Menu, type “Device Manager,” and click to launch it.

Step 2: Extend the list of Display adapters.

Step 3: “Right-click” on your Display adapter and choose “Uninstall device” from the context menu.

Step 4: Once the driver has been successfully removed, restart your computer to ensure that the driver is reinstalled.

Check to see whether it has resolved your problem.

Method 4: Disable The Game Mode

A game mode is a script or software that takes control of your computer’s graphics hardware. In some cases, the operating system improves the performance of a game and the overall gameplay experience.

However, there are certain cases in which these ‘gaming modes’ prevent the computer’s ability to run in full-screen mode until they have been engaged.

Step 1: In this instance, consider disabling all game modes or the ‘optimizer’ that are now active.

Step 2: You may also remove them by following the instructions in the program wizard.

Step 3: Check whether the problem is addressed by restarting the program that was not running in full-screen mode.

Step 4: Check the task manager to see which programs are currently running (Press Windows + R and Type ‘task manager’) to see if any are currently running.

Method 5: Run Game In Compatibility Mode

The full-screen gaming mode may not be entirely compatible with Microsoft Windows 10. If you are having trouble with the games, you may try running them in compatibility mode instead.

Step 1: Right-click the shortcut to the full-screen game and choose Properties from the context menu that appears.

Step 2: Select the Run this application in compatibility mode for checkbox on the Compatibility tab, and then choose an older version of windows from the drop-down option that appears.

Step 3: To save the changes, select Apply and OK from the drop-down menu.

Frequently Asked Question

What is the best way to get a full screen on Windows 10?

It is simple to pick the suggested configuration options in the display settings of your Windows operating system. Alternatively, you may hit the F11 key, which will enable full-screen mode in Windows fairly quickly.

How Do I Turn Off Windows 10’s Full-Screen Mode?

It’s just as simple to get out of the full screen as going into it. Alternatively, you may hit the Esc key again or move your mouse pointer to the top of the screen, where a close sign will appear, which you can then pick from the drop-down menu.

Conclusion

Working or playing games on Windows 10 full screen allows you to concentrate more on what you’re doing. Your full-screen issues in Windows 10 will be resolved if you follow the steps and information provided here. After you’ve fixed the problem, I hope you’ll never have to deal with it again. Your PC troubles can be resolved by using any of these techniques.

Consider the scenario that you have a massive photograph that you’d like to print. Perhaps it’s a photograph of a map with a 2000*2200 pixels resolution, or it could be a photograph of a building, or anything else. The below methods will help you to find out “how to print large images on multiple pages?”

Naturally, you could print the picture to a single page of A4 or Letter paper, but this would result in a loss of a great deal of detail in the process.

3 Best Ways To Print Large Images on Multiple Pages

You may not have realized that you can use simple software like Microsoft Paint to print large images on several pages. There are a variety of different options available to assist you to print large images easily.

Method 1: Using Paint Application

Step 1: To begin, launch Paint by entering the word “paint” into the Search box on your computer’s desktop.

The Paint program should now be open on your computer’s desktop.

Step 2: Open the picture that you want to print and click on it. To do so, select the File tab from the ribbon by clicking or tapping on it. Then click or touch on the Open button.

Step 3: Select the image you wish to print from your Windows PC or device by browsing your files. When you have made your selection, click or tap Open.

You should now be able to see your image loaded in Paint.

Step 4: Now that you’ve got your picture open in Paint, let’s get started. Once you’ve told Paint that you want the picture printed on several pages, you may move on to the next step.

Step 5: To do so, select Print from the File menu on the ribbon by clicking or tapping on it. Page Setup may be found under the Print menu, which can be opened by clicking or tapping.

Step 6: The Page Setup dialogue box appears on the screen.

There should include a component named Scaling with other printing settings like paper size, orientation, and margins.

Note: To print your large image on many pages, all you have to do is inform Paint that you want to resize your picture to “Fit to” as many pages as you like and then press “Finish.” To print your picture on four pages in a rectangle, for example, you need to use the “Fit to” box to enter the values two by two pages in the “Fit to” box.

You may input the numbers you require based on how wide or large you want your picture to be when printed, as well as how long and broad it is, among other factors.

Step 7: You may save your selections by clicking or tapping OK after you’ve determined how many pages you want the picture printed on.

Your Settings are saved.

Paint understands that you want to print the picture on many pages, so it does so. The only thing left to do is to begin the printing process.

Step 8: On the ribbon, select the File tab and then Print. You may also use the keyboard shortcut CTRL + P.

Step 9: If you have more than one printer installed, choose the one you wish to use from the drop-down menu. Then click or touch on the Print button to begin printing.

Step 10: Prepare to have enough sheets of A4 paper on hand to allow your printer to print your image successfully.

Method 2: Using Spread Sheet:

Step 1: To do this with Excel, start by creating a new Spread Sheet.

Step 2: Click on Insert and select Picture.

Step 3: To resize the picture, drag the bottom corner up or down. As you can see in the image below, the inches will appear when a tooltip as you drag the cursor over them.

Your picture will print across many pages, and you will be able to piece them together when transferring them. Wide margins appear to work best in this situation, so make use of them.

Method 3: Using Adobe Reader

Step 1: First of all, Convert Your Image to a PDF file.

Step 2: Selecting the poster option will divide a single image into many pages.

Step 3: Increase the time scale, which will result in the document being divided into multiple pages.

Step 4: To print a document, click on the Print button.

Frequently Asked Questions

What is the best way to print certain pages from a PDF?

Select PDF pages to print and save them.

Step 1: Download and install Adobe Reader or Acrobat to view and print the PDF.

Step 2: If it isn’t already open, click the Pages tab on the left-hand side of the document window to get started.

Step 3: To print the page thumbnails, hold down the Ctrl key (on Windows) or the Command key (on Mac OS) while clicking on them.

Step 4: Select File > Print from the menu bar.

Step 5: Select OK or Print from the drop-down menu.

How can I print only particular pages of a document?

To print particular pages from a document, use the following syntax:

Step 1: By hitting Ctrl + P, you may bring up the print dialogue box.

Step 2: Pages can be selected from the Range section of the General tab.

Step 3: In the text box, enter the page numbers you wish to print, separated by commas, one for each page you want to print. To indicate a range of pages, use a hyphen (-).

No one enjoys the sensation of powerlessness that comes with being unable to click on something on a computer. It’s extremely annoying when it’s on your Desktop. However, there are several simple solutions to this problem.

This problem might occur when the file manager stops responding. If you right-click on any folder or file on the Desktop, and it is not responding then you should have to fix this error.

8 Ways to Fix Can’t Click On Desktop Windows 10

Here are ten solutions that are effective in resolving the mouse right-click not functioning issue. Work your way through the list until the issue is addressed.

Method 1: Restart Your Computer

If this is the first time you’ve encountered this problem on your computer, a simple reboot should resolve the situation.

To restart your device without the use of a mouse, follow the steps below:

Step 1: Disconnect your mouse from your computer.

Step 2: On your keyboard, press the Alt+F4 key combination.

Step 3: After that, hit the down arrow key until you see the option to “Restart” on the menu bar.

Step 4: To restart your computer, press the Enter.

Step 5: Wait for 5 minutes after restarting your computer to ensure that everything is properly loaded. After that, all you have to do is reconnect your mouse.

Method 2: Check the Tablet Mode

The use of the Tablet mode may also result in the right-click not functioning issue occurring. Whether you are not already utilizing the tablet mode, it is advised that you do so to determine if this resolves the issue.

Here’s how to double-check that you’ve disabled it:

Step 1: To access the action center, choose the action center icon (which looks like a dialogue box) in the far bottom-right corner of your screen.

Step 2: In the Tablet mode menu, make sure the icon is greyed out.

If the problem persists, go to the next step in the process.

Method 3: Check for Hardware Problems

Identifying and eliminating any hardware issues may be necessary before resolving our mouse right-click not functioning problem.

Step 1: To test whether the right-click is working correctly, try plugging your mouse into another USB port.

Step 2: If this is the case, the preceding port is at fault.

Step 3: If the answer is no, go to the next step.

Step 4: Use a different (and functional) mouse on your computer to verify whether the mouse right-clicks not functioning situation is fixed.

Step 5: If you answered yes, you might need to fix the defective mouse or replace it with a new mouse.

Method 4: Update Your Mouse Driver

Having a faulty mouse driver may cause your mouse to stop operating and prevent you from performing any mouse clicks. It is possible that updating your mouse driver would resolve the issue. To upgrade your mouse driver, follow these steps:

Step 1: To access, first press Windows key+S together, after which you must type “Device Manager. ”

Step 2: Next, select the “Device Manager” option from the search results in the window that appears.

Step 3: After you have selected the first thing in the list, press Tab to make it visible.

Step 4: Continue pushing the down arrow until you reach the “Mice and other pointing devices.”

Step 5: Now, tap the right side of the screen to make it larger. With a down arrow, choose the mouse device that you are now using.

Step 6: Press Enter to bring up the “Properties” window for that particular device.

Step 7: Press the Tab key until the “General” tab is highlighted in the Properties. Click OK to close the Properties window.

Step 8: To access the “Driver” tab, use the right arrow key on your keyboard.

Step 9: Press Tab once more to choose the option that reads “Update driver,” and then press Enter to confirm your selection.

Step 10: Choose the option “Search automatically for updated driver software” from the drop-down menu.

Step 11: Wait until Windows looks for and downloads the most recent version of the keyboard driver, then installs that version of Windows.

Step 12: To close the Device Manager window, press the keys’ Alt+F4′ on your keyboard. Restart your computer to get things going again.

Method 5: Disable Third-Party Software

Step1: If you have recently installed third-party software to personalize a mouse or keyboard, this may have caused problems with the pointing device to occur.

Step 2: The Task Manager should be used to close any applications such as Razer, Logitech, or other customization software.

Step 3: Check to see if disconnecting and reconnecting the mouse fixes the problem.

If the problem persists, go to the next step in the process.

Method 6: Close and Relaunch Explorer.Exe Process

Step 1: Open your Task Manager by hitting the Ctrl-Shift-Esc keys altogether.

Step 2: Select the Tab key and continue to press it until one of the processes is chosen.

Step 3: Go to the location where you installed Windows Explorer. Because you cannot right-click, hold down the Shift key and press the F10 button to bring up the context menu.

Step 4: Now, using your down arrow key, locate and choose the option labeled “End Task.”

Step 5: After that, press the Enter key to bring the explorer.exe process to a close.

Step 6: A blank screen will appear at this point, and you will need to click the Windows key and the R button simultaneously to bring up the Run dialogue box.

Step 7: In the provided box, type explorer.exe, and you will be sent to a screen that allows you to relaunch Windows Explorer.

Method 7: Update Your Windows

Step 1: Press the Windows 

Step 2: Type Update.

Step 3: If necessary, use the arrow keys to navigate to the Check for updates

Step 4: To move through the Windows Update area, press the Tab key on your keyboard.

Step 5: Select Download updates from the drop-down menu and press Enter.

Step 6: Any pending Windows 10 updates will be downloaded and installed by Windows.

Some previous versions of Windows are known to have mouse-clicking problems that are not present in Windows 10. To resolve any difficulties caused by a bug in the operating system, make sure you use the most recent stable Windows 10 version.

Method 8: Run DISM

DISM is a Windows utility that assists us in repairing problems caused by Windows corruption. Misconfigurations in our operating system might cause right-click on the mouse to become unresponsive in some situations.

If this is the case, we’ll need to run DISM to determine and correct the problem.

Step 1: Click the Windows logo key on your keyboard, then type cmd and press the Enter key to continue.

Step 2: Enter the following command after you have typed it:

Step 3: exe /Online /Cleanup-image /Restorehealth is the command to run.

Step 4: Allow some time for the entire process to be completed.

Step 5: Write sfc /scannow into the command prompt and click Enter.

Step 6: Reboot your pc and verify that the mouse right-click function is operational.

We hope these methods will fix your problem!

Read More: 

• How to Fix Kernel Security Check Error on Windows 10?
• Fix Reboot and Select Proper Reboot Device Windows 10 Error
• 11 Best Ways To Fix Wi-fi Connected But No Internet Error

Wondering here and there to look up the best solutions that would work? Well, you are already in the right place. Stay! So, all of you must have been in a situation where you see your Wi-Fi connection on your device but the internet is not working. Argh!

Extremely frustrating, right? Well, the internet is only a blessing when it is fetching you the desired web pages. Everything starts going downhill once you lose internet access. The error message “Wi-Fi Connected But No Internet” can be linked with many factors such as any network bugs, outdated drivers, or router, etc.

It can be anything disturbing the access to your internet. At first, powering off your computer one to two times might help. If it doesn’t help, then you must know that the issue is deeper than that and you have to perform some serious troubleshooting solutions to get your internet connection up and going.

To help you get back to enjoying your internet services, we have compiled this guide to fix this issue. Continue reading.

Since the causes of the “Wi-Fi Connected But No Internet” issue on your computer might vary. You have to consider all the troubleshooting solutions listed in this article. Be positive and keep going, fellows!

What Does Error Message “Wi-Fi Connected But No Internet” Mean on Windows?

You might already relate to those Windows OS users on wireless connection having a “Wi-Fi Connected But No Internet” error message over their internet access icon.

If you do, you should know what this issue means before troubleshooting it.

It is a teeny-tiny, yellow warning triangle that has a bold black exclamatory sign. This error means that your device is successfully connected to the Wi-Fi network via router or modem but something is blatantly blocking the internet access.

It gets super frustrating when your device has everything in order, but the internet’s unavailability from the router makes things hard.

Now that you have a fair understanding of this problem, let’s quickly navigate to the solutions. But before that, why not see some possible culprits for this internet issue.

Let’s go!

Wifi connected but no internet from techsupport

What Are The Causes Of Error Message “Wi-Fi Connected But No Internet” On Windows?

Internet access issues can sometimes be difficult to characterize because their causes are not always clear. However, according to user reports, we have narrowed down the following possible reasons for the “Wi-Fi Connected But No Internet” error message.

Since your Windows won’t tell you the exact cause other than showing the error popup. So, it is your job to identify your issue and then find a solution for it from the list.

Now, let’s get straight to the causes of the internet connectivity errors:

1. Faulty or damaged Wi-Fi adaptor.

2. Incorrect IP address.

3. Corrupted DNS cache

4. Faulty router or modem.

5. Outdated wireless drivers.

6. Failed wireless network.

7. Incorrect DNS configuration.

8. Something is wrong at Internet Service Provider’s (ISP) end.

9. Antivirus programs are blocking internet access.

These are the 9 most common causes for the “Wi-Fi Connected But No Internet” error message. Any of them can be the main culprit for the unavailability of the internet.
With the help of these, it will be easier to troubleshoot the targeted problem.

Here comes the main section of this article. Now, let’s take you to the troubleshooting adventure.

Read this: How to Save Chrome History in Windows 10?

Is Your Device is Disconnected or the Entire Network?

You are always recommended to use the basic and the easiest way out first.

In the prerequisite, you must verify whether the error message “Wi-Fi Connected But No Internet” appears on your device or every other device on your Wi-Fi network. This will save you time and you will only have to perform the limited solution.

Here is how you confirm if all devices are connected to a mutual Wi-Fi network or just your device.

Simply grab your phone or switch on to another PC. Now go to the Internet Access icon and connect to your Wi-Fi network. If the same error message of “Wi-Fi Connected But No Internet” shows up on all of your devices, then there is probably something up with your router. Or maybe your ISP is down.

On the other hand, if only your device seems to be affected by the error message, then you must have DNS issues, faulty drivers, adapter issues, etc.

Keeping the above two cases in mind, we have split the guide into two sections where you will find solutions for both categories of the same internet access issue. Get going!

Read this: How to Fix Wifi Keeps Disconnecting Errors on Windows 10?

11 Best Troubleshooting Ways To Fix “Wi-Fi Connected But No Internet” Error?

We believe that you have already figured out the possible cause. If yes, then select the suitable solution from the list and apply it. You will be free from this draining issue.

Also, no problem if you haven’t figured out the cause. Just go through the entire troubleshooting guide and apply all the solutions. None of the solutions requires you to be tech-savvy.

Apply the following solutions for the error message “Wi-Fi Connected But No Internet” on all the devices of your Wi-Fi network:

Solution 1: Reboot Your Router or Modem

When you see that the same error message has taken over all the devices on your Wi-Fi network, go to reset or reboot your router/modem.

Here is how you do it:

1. Power down your router/modem.

2. Unplug it/them from the wall.

3. Wait for a minute and plug the router back if you only have a router. Or, if you have a modem then plug it first.

4. Once everything is put back into place, power up your device(s) after 15 minutes.

5. Check if the same error is showing up on your devices or not.

Solution 2: Check If There Is Internet Service Outage

Another reason for the unavailability of internet access despite network connectivity is the internet outage at your ISP’s end.

The network can be overloaded or your ISP has simply cut down the service. To check more, navigate your provider’s Facebook page using your cellular data and determine the actual cause.
Or you may also contact your ISP directly to keep track.

Solution 3: Perform Entire Network Reset

If the problem persists on all the devices of your Wi-Fi network, then it is time to reset your entire Wi-Fi network. We know that it is frustrating and time taking. But once this solution is done, you are all set for a fresh start.

Noteworthy details: Note that this solution will bring everything back to the default state and you will need to input your network’s password again to set up the network.

Here are the steps to reset your entire wireless network.

1. Go to your computer’s search menu.

2. Type Settings and launch the Settings app.

3. Open network & internet option.

4. Move to the left-hand menu list and click on the Status.

5. Scroll down to locate the Network Troubleshooter option.

6. There will be a list of all Networks. (Ethernet, Wifi or all)

7. Click on Wifi as Network troubleshooting, it will start detecting the problems.

8. Let it diagnose, and then it will give you follow-up tasks to perform all the easy on-screen instructions.

9. Now use your taskbar to connected to your Wi-Fi network and check if the same error is still appearing. It will most likely be disappeared.

How to Fix Wi-Fi Connected But No Internet” on a single device?

Apply the following solutions if you are seeing the error message “Wi-Fi Connected But No Internet” on a single device of your Wi-Fi network:

Solution 4: Restart or Reboot Your PC

If you got lucky enough, you might have all the temporary glitches resolved just by simply restarting or rebooting your device.

Sometimes an annoying bug enters your system which you can easily eradicate with a reboot. Especially if you are using a Wi-Fi network. If this solution doesn’t work, you move to the next.

Solution 5: Diagnose via Windows Network Troubleshooter

So, the error message “Wi-Fi Connected But No Internet” didn’t go away with the reboot? Don’t worry! There are so many solutions lined up.

Another easy fix is running the built-in Windows Troubleshooter utility. Many network issues seem to go away with this solution.

Here is how you perform Network Troubleshoot.

1. Go to your computer’s search bar.

2. Type settings and hit Enter key.

3. Launch Settings.

4. Select the network & internet option.

5. Move towards the left-hand menu and find the Status option there.

6. Click on the Status.

7. Now select the Network Troubleshooter option as shown in the screenshot below.

8. Let this utility diagnose all the network issues.

Get back to your computer and check if the internet is available or not. Jump to the next solution if the situation remains the same.

Solution 6: Keep Your Network Adapter Driver Updated

Just like updating your Windows OS to an updated version is necessary, you must keep the hardware drivers updated as well for better communication between the router and your device.

Follow these steps to upgrade your driver thus Network Adapter Driver.

1. Type Device Manager in your PC’s search menu.

2. Locate the Network Adapters option in the list.

3. Place the cursor there to expand it.

4. From the expanded list, locate the Wireless option.

5. Right-click on the Wireless option.

6. Select Update Driver, just like shown in the screenshot.

The network drivers will be updated and you might get rid of the error message of “Wi-Fi Connected But No Internet”.

However, if your drivers are not updated after applying the mentioned steps, it means your system requires a manual installation. Do it on your own or have it done by a tech expert. It is all up to you.

Solution 7: Turn Off the Fast Startup Feature

Windows OS comes with a built-in feature of Fast Startup feature that quickly shuts down and powers on your PC. When you have this feature enabled on your PC, it might disrupt the communication between two devices.

This is why you need to disable it right away to remove the slightest doubts.

Here is how you disable/turn off the Fast Startup feature to get rid of the “Wi-Fi Connected But No Internet” error message.

1. Press the Windows key and R key together to launch the Run utility.

2. Type “powercfg.cpl” in the Run search bar and hit Enter key.

3. It will bring up Power Options on your screen.

4. Move towards the left-side menu to locate choose what power buttons do option. Click on it.

5. Go to the definition section now.

6. Click on the change settings currently unavailable option.

7. Now navigate to the section of shutdown settings.

8. The option for the Fast Startup feature will appear.

9. Remove the checkmark of the Fast Startup feature and hit the Save button as shown below.

10. Restart your PC and connect to your Wi-Fi network to see if the issue persists.

This solution didn’t help? Don’t worry, move to the next one.

Solution 8: Turn Off All the Security Software Programs

The updates from some of the security software programs like Avast can block internet access out of nowhere. It has been reported many times by different users.

The glitch updates block some websites or sometimes the entire internet connection. Sometimes running your system through scan can also bring such unwelcomed internet issues. So, it is better to disable such software. And even better to uninstall them.

Solution 9: Flush Domain Name System (DNS) Cache

Any bugs or glitches brought about by malicious or viral attacks can corrupt your DNS. Later on, those corrupted DNS cache files disrupt the IP address and your IP address can be minimally mismatched.

A mismatched or incorrect IP address directly leads you to the unavailability of the internet whether your Wi-Fi network is connected or not. It is also the reason to bring a “Wi-Fi Connected But No Internet” error message.

This is why you need to flush your DNS cache. Here is how you do it:

1. Go to your computer’s search menu.

2. Type Command Prompt and hit Enter key.

3. Right-click on the command prompt and choose the “run as an administrator” option.

4. A command prompt window will open up.

5. Type these commands in the window as shown in the screenshot. Make sure to hit Enter key after inputting each command.

ipconfig /flushdns [Enter].

ipconfig /release [Enter].

ipconfig /renew [Enter].

6. Close the command prompt window by the exit.

7. Restart your PC and connect to your Wi-Fi network. The issue will most probably be already disappeared.

Read this: How to Open Command Prompt in any Folder?

Solution 10: Configure DNS Server Settings

Your DNS settings may have been configured incorrectly. Such random incorrect configurations are responsible for errors such as “Wi-Fi Connected But No Internet”.

Here is how you change your DNS server address to make things right:

1. Open the Run utility by pressing the Windows key and R key simultaneously.

2. Now go to the Run search menu.

3. Type “control /name Microsoft.NetworkAndSharingCenter” in the text bar and hit Enter key.

4. Click on the Change Adapter Settings on the top left corner.

5. Left-click on Wi-Fi.

6. Open Properties.

7. Go to the new window and click on Internet Protocol Version 4 (TCP/IPv4), Select the Properties button down there.

8. It will bring another window showing how your DNS server and IP address are obtained.

9. Now change its settings to Use the Following DNS Server Address down there.

10. Input a preferred DNS server address of 8.8.8.8 and for an alternate DNS server address, you may input 8.8.4.4.

11. Finally hit the OK button to save changes.

Restart your PC and connect to your wireless network. Your internet will be up and running this time.

However, if it doesn’t work, try the last troubleshooting solution on our list.

Solution 11: Check If Your Device Has Valid IP Address

One of the biggest factors that bring the error “Wi-Fi Connected But No Internet” is the invalid IP address. This is why you have to check the validity of your IP address to restore internet access.

Here are the steps to do it.

1. Move towards the bottom right corner and click on the network icon.

2. Select Open Network & Internet Settings option.

3. Select Change Adapter Options.

4. Single-click on your network. (Wi-Fi)

5. A new window will open up.

6. Click on the Properties.

7. Locate the Internet Protocol Version 4 entry and double-click on it.

8. Make sure that both of the IP addresses and DNS server addresses are the same and hit Enter key.

Connect to your Wi-Fi network and check if it is working this time. Your internet should work this time.

Final Thoughts:

Remember that there is not a constant or a single solution to fix the error message “Wi-Fi Connected But No Internet”. You are recommended to apply all the above-mentioned troubleshooting solutions in our guide to fix the software issues. While you must get in touch with an expert technician if the issue is linked to any hardware damage. They will inspect the network and assist you further.

Happy troubleshooting!

File Explorer is a useful tool that gives you access to manage your A to Z files on your hard drive. Being that said, this management tool is a must-have tool for you to quickly navigate your recent or older files where you might want to tweak some changes.

So, when this management tool stops responding, you run into a lot of frustrating issues. Your browsing gets badly disrupted and you end up questioning and cursing your computer.

Instead of being stuck with your frozen File Explorer, we are here to help you. In this article, we have put together some effectively working troubleshooting solutions.

Whenever your File Explorer stops responding on your Windows 10 PC, apply the mentioned solutions and you will most likely have the issue resolved.

Here is a noteworthy detail for you. File Explorer is also known as Windows Explorer. Don’t get confused between their names as they are the same thing with a slight name change. File Explorer is for newer Windows versions while older versions have this feature as Windows Explorer. So, they carry the same functions.

What is File Explorer?

File Explorer, previously known as Windows Explorer in the older Microsoft Windows version is a system management freeze tool. This built-in file managing application was incorporated in Windows from Microsoft Windows 95 update.

Ever since this feature got released, it helped millions of users to access and navigate easily to their files, drives, and folder residing on their system.

It has a user-friendly graphical interface which can be easily obtained by going on the taskbar.

Before we go forward to explore our File Explorer or Windows Explorer troubleshooting guide. Let’s go through some possible causes for File Explorer not responding.

File explorer not responding always. from windows

Why File Or Windows Explorer Not Responding On Windows 10?

Unfortunately, there is no definite or fixed cause for this annoying issue to show up. The main source or reason can be anything.

Down there, we have listed some of the most commonly reported causes for Windows Explorer not responding. They are based on the user reports on multiple tech forums using Windows 10.

1. You Might Have Changed Your Display Settings

According to many users on Microsoft forums, changes in the display settings can easily cause distortion and disturbance in the File Explorer tool.

For example, you may have changed the font size and permitted different applications to make changes to your display settings.

If that’s the case, reverting is the best option.

2. Windows Explorer History is Clogged

Sometimes the File Explorer tool on your Windows 10 gets so overcrowded that it becomes clogged.

This later causes the File Explorer to behave abnormally and stops responding.

You may get rid of it by simply clearing the history.

3. Using Outdated Windows 10 Version

If you miss out on updating your Windows 10 OS, you might run into different existing issues and security holes.

Outdated versions also stunt your File Explorer to work at all. That’s why an immediate upgrade is crucial.

4. System Files Are Problematic

When there is something wrong with your system files, File Explorer usually suffers. Problematic system files freeze your Windows Explorer and your files are no longer your control.

5. Insufficient Space on Your System Drive

When there is not enough space on your system drive, so many functionalities on your system including File Explorer freezes. The solution for it is in our guide.

Related article: How to fix System Thread Exception Not Handled Windows 10 Error 

Top 9 Best Ways to Fix File Explorer Not Responding Windows 10 Error

Now that so many possible causes are right in front of you, troubleshooting would be a lot easier.

Here is a checklist of troubleshooting methods to resolve the issue of File Explorer not responding. This guide is primarily for Windows 10 users. Continue reading to get out of the mess.

Method 1: Wipe Out the File Explorer History

We have already mentioned in the causes section how overcrowded history can disturb the File Explorer performance. Fixing this issue will require you to remove its history.

Don’t know how to do it? Simply refer to the following steps to remove File Explorer history.

1. Launch the Run utility by pressing Windows and R keys together.

2. Type Control.

3. Hit the OK button.

4. Now make sure you set the viewing mode to Large Icons.

 

5. Select File Explorer Options from the list.

6. A new properties window will open. Here you need to check the listed items and click on the Clear button.

7. Now restart your computer and check if Windows Explorer responds now.

Method 2: Modify Your Display Settings

Modifying or reverting your display settings can get a little bit bizarre. Although it is an effective solution for solving file explorer issues. Moreover, users also reported that simply modifying the display layout settings did well for them.

Here are the steps to revert your display settings:

1. Go to the Windows logo corner on the display screen of your PC.

2. Go to the Settings app now.

3. Open the System option.

4. Stay on the Default display tab.

5. Now set the size of the text, apps, and all other items to exactly 100% or whatever your Windows suggests to you. It will be done under the Scale and Layout option.

6. Now restart your PC and check if you can access Windows Explorer again or not.

Related article: How to Fix Second Monitor Not Detected On Windows 10 Error?

Method 3: Restart the File Explorer in the Task Manager (Automatically)

The above two are the most helpful fixes that will eventually solve your issue. However, if the file explorer issue does not seem to be leaving any soon. Then you are required to dive for more solutions.

Restarting and rebooting always help when it comes to Windows management tool issues.

First, you need to restart your File Explorer using task manager automatically on your Windows 10 PC.

Here is how you do it.

1. Go to the taskbar on your screen.

2. Type Task Manager and hit Enter.

3. Task Manager will be launched. You may directly access Task Manager by right-clicking on the “type here to search bar” on your PC.

4. Change the settings to compact mode and click on the More details option there.

5. Open the default Process tab.

6. Select the File/Windows Explorer option.

7. The Restart button will now be visible. Click on it.

8. The Windows or File Explorer will begin to restart. All the items on your taskbar will disappear for a while so don’t be scared.

9. Let your PC restore to a normal state.

10. Now check if you can use File Explorer on your Windows 10 PC.

Method 4: Restart the File/Windows Explorer Using Command Prompt (Manually)

Sometimes the automated way of restarting your File Explorer doesn’t go as planned. At such instants, you level up the restarting game by using Command Prompt.

It is a manual way to restart your Windows 10 PC.

Here are the steps to do.

1. Launch the Run utility by pressing the Windows key and R key together.

2. Type cmd in the Run search.

3. Hit Ctrl + Shift + Enter keys.

4. It will launch the Command Prompt window with administrator permission.

5. To disable or stop the File Explorer first, input the following command.

taskkill /f /im explorer.exe

6. Hit Enter so the command is executed.

7. Now to restart the Windows or File Explorer, simply input the following command. And make sure to hit Enter again so the command is executed.

start explorer.exe

8. Close the Command Prompt window by inputting exit.

9. Restart your PC and check if the File Explorer is responding now or not.

If this method of restarting also doesn’t work out, then go for the following one. You never know which one works for you. So, try them all.

Method 5: Use a Batch File to restart the explorer.exe Process

It is completely okay if none of the above solutions did the job for you. You still have got plenty of quick solutions left.

One thing you can try is making a batch (.bat) file and processing it with administrative-level privileges. Doing so can resolve your File Explorer issue on Windows 10 once and for all.

Here is how you use a batch (.bat) file to restart the explorer.exe process.

1. Go to the empty space on your Desktop and right-click there.

2. Click on New.

3. Select a Text document as shown in the screenshot.

4. Rename the file with Windows or File Explorer. Make sure to open the file with any notepad app.

5. Type the text below in that blank document. Or it is easy to just copy/paste it.

taskkill /f /IM explorer.exe

start explorer.exe

exit

6. Go up and click on the File option there.

7. Select Save As.

8. Choose the file type by clicking on the All Files option.

9. Now the name the file as Restart Explorer.bat

10. Click Save.

11. Close the document and go to your Desktop again.

12. Right-click on the recently saved file Restart Explorer.bat.

13. Click on the option Run as Administrator as shown in this screenshot.

14. Navigate to your File Explorer and check if it is responding now.

Noteworthy takeaway: You can keep that batch (.bat) file saved in your PC to use it again.

Method 6: Free Up Some Drive Space on Your Windows 10 PC

When your system drive or C drive is overcrowded, it can cause a lot of disturbance in other functionalities including the File Explorer tool.

It is always recommended to make some space on the C drive so all the functions are carried out smoothly.

Here are two recommended ways to free up space when File Explorer is not responding on your Windows 10 PC.

A. Delete files using Storage Sense

1. Go to the start menu and select Settings.

2. Open System.

3. Click on Storage

3. Turn on Storage Sense so all the unnecessary items on your drive get removed automatically.

4. For that, navigate to Configure Storage Sense or run it now how we free up space automatically option.

5. Click on Clean now.

B. Uninstall unwanted apps

You can simply go on an uninstallation spree if you have too many unwanted apps lying here and there. They consume huge space.

Related article: How to Fix “There was a problem resetting your PC on Windows 10”?

Method 7: Perform the System File Scan using Command Prompt

Gone this far and still haven’t got your issue resolved? Don’t worry. You are yet to explore a couple of methods or even more.

One of them is simply running the system file checker scan. It fixes many stubborn issues. Here is how you do it.

1. Launch the Run utility by hitting Windows and R keys together.

2. Type cmd

3. Hit Ctrl + Shift + Enter keys.

4. Command Prompt window will be launched with administrator permissions.

5. Type the command sfc /scannow and hit Enter so the command gets executed.

6. Let the System Checker scan now you are good to go.

Method 8: Update Your Windows 10 Versions

Windows Explorer or File Explorer not responding can get annoying. If you have tried everything above and still didn’t have it resolved. Then probably you have missed out on the most important fix which is none other than upgrading your Windows 10 PC with the latest versions.

Here is how you do it.

1. Go to the start menu.

2. Open Settings.

3. Select Update & Security.

4. Stay in the Windows Update button.

5. Hit the Check for Updates button.

6. If you see any new updates uninstalled, click on the install button.

Method 9: Scan Your PC for Malware Attacks

Several issues can navigate your system when it is under malware attack. To be sure of such things, run your Windows 10 for viruses and malware freeze tool or antivirus software.
Who knows? You might just have your File Explorer not responding issue resolved.

Conclusion

That’s all, folks. Here you have the top 9 effective troubleshooting solutions to fix File Explorer or Windows Explorer not responding. It is such a crucial tool.
Apply the above-mentioned fixed to make the File Explorer tool functional again. Good luck!

Related articles

• How to fix WiFi Keeps Disconnecting Issues on Windows?

• How to fix modern Setup Host & High CPU Usage Errors?

• How to change the default installation folder on Windows 10?