8 Best Ways to Fix “Reboot and Select Proper Boot Device” Error on Windows 10

August 1, 2021 By SoftsFreak Editor Leave a Comment

Have you ever attempted to boot your computer only to encounter the annoying error of “Reboot and Select Proper Boot Device”?

If yes, then stick around. You will probably find the best troubleshooting solutions in our blog that work with ease and efficiency to solve the error.

Let’s tell why you should never leave this error be and try as many solutions as you can to get rid of it.

Everything becomes super annoying when your system boot up doesn’t let you boot into your operating system. You are no longer able to access anything on your PC. All the systematic functionalities freeze and you are stuck in front of a black screen that displays an error message of “Reboot and Selects Proper Boot Device”. Windows 10, 8, and 7 users are the most affected ones.

There are multiple known and unknown reasons for this error to show up. The most common reasons are corrupted system files and failure of the hard disk drive.

Well, it doesn’t matter what the causes can be when you have all the effective solutions right in front of you. You just need to check them for once before troubleshooting and that’s it.

So, before we rush towards the troubleshooting guide to fix the “Reboot and Select Proper Boot Device” error. Let’s discuss what this error means and what the causes of this error are.

What is the “Reboot And Select Proper Boot Device” Error?

If you are new to this issue, it is better to know what thing you are going to deal with.

Just like the error message name “Reboot and Select Proper Boot Device” suggests, it simply means to restart your PC and select the hard disk device that your system uses for booting.

When your system BIOS fails to locate the bootable device where the OS is initially stored, you see a black window with the warning “Reboot and Select Proper Boot Device”.

This error message prompts you to reboot your PC and then select the accurate bootable devices which have the OS installed initially. Several issues can make this issue appear on your screen

Since this error falls into the category of BIOS error, so it can appear on any Windows version such as Windows 7, 8, and 10. The Windows startups remain dormant and stuck whenever you try to reboot your computer.

No doubt, this error has troubled many Windows users now and then. But you are lucky enough to find us here. The troubleshooting solutions in this post will be highly helpful for you. So, keep reading.

We have narrowed down some potential causes for the error message “Reboot and Select Proper Boot Device”. You are recommended to have a quick look at them before troubleshooting. In this way, you can have a better understanding of this issue and thus its solutions.

Read this: How to fix “There was a problem resetting your PC in Windows 10?”

What Causes Of the “Reboot And Select Proper Boot Device” Error?

This error message stems back to many generative factors. Especially if you have messed with your computer boot order. Though this error occurs due to several known and unknown reasons as well.

Some of the most common causes for “Reboot and Select Proper Boot Device” error are:

The disk required for the bootable device has been damaged. It can be older too.
A faulty cable, worn-out SATA slot, and outdated hard drive are not letting the BIOS detect your boot disk.
BIOS fails to detect bootable devices due to improper connectivity.
There is no active partition for the drive. The partition is supposed to be proactive and functional. Otherwise, the bootable storage won’t be detected at all.
The boot sequence order in BIOS got disrupted.
Corrupted boot files.
Corrupted Master Boot Record (MBR).
The corrupted operating system on boot.

So, here we are done enlisting the most common causes for this error. Of course, there can be many more. But the mentioned ones will help you to further decide which troubleshooting solution is going to help you. Keep reading.

"Reboot and select proper boot device" Error from techsupport

Top 8 Ways to Fix “Reboot and Select Proper Boot Device” Error

After knowing the corresponding cause for the issue, it will now be easier for you to track down a suitable solution. However, applying one solution doesn’t help. Then, you must attempt all the given troubleshooting solutions.

Let’s find out the topmost effective ways to fix “Reboot and Select Proper Boot Device” on your Windows 7, 8, or 10 computer.

Fix 1: First Things First – Change the Boot Order

Before you head out to perform other extensive fixes, let’s start the troubleshooting with the easiest fix.

What is Boot Sequence? Well, it is a BIOS boot configuration that lets your BIOS initiate booting all the bootable devices in perfect order or sequence.

That order is pre-determined by the manufacturer.

When you change or fix the boot order of the Primary Storage Device where the operating system is installed, the issue can get resolved in a matter of a few minutes. So, we recommend you start with this solution.

Follow these instructions to change the boot sequence:

1. Turn off your Windows PC.

2. Press the Power Button to boot it up.

3. Press any preferred keys from ESC, DEL, F1, F2, F8, F10, or F12 to access BIOS Settings.

4. Enter the Boot Options once you access BIOS Setup Utility.

5. Change the settings to Primary Boot Device.

6. The arrow key will take you to the top of the list.

7. Save the changes you just made.

8. Restart your PC and see if the error has disappeared.

It didn’t work out. Don’t worry. We have so many other solutions in line. Move to the next solution.

Fix 2: Inspect the Power Cable to Your Hard Disk Drive

The power cable is used to connect the motherboard and your hard disk drive where the operating system is initially installed. Let us suppose that the power cable is loosely held, improperly connected, or broken.

If any of this happens, then your hard disk drive doesn’t get detected for all to perform the boot.

This is exactly why you need to inspect the power cable ASAP.

Here is how you do it:

1. Turn off your computer.

2. Now open your computer.

3. Look for the power cable that goes from the hard disk drive to the motherboard.

4. Inspect the connection overall to see if there is anything unusually wrong.

5. Tighten the cable connection and make it properly held if you see something wrong there.

6. If that doesn’t solve the error, then remove the power cable and test it on another PC.

7. And if that too doesn’t do the job for you, then the cable is frayed or damaged.

8. Replace it with the new one.

This should now solve the error. And if the error persists, then you should keep moving to the next solution. You never know which one of them works for you.

Fix 3: Perform Boot Drive Detection in Your Computer’s BIOS

When the bootable drive is not detected in your PC’s BIOS, then you are likely to face the error message “Reboot and Select Proper Boot Device” even more.

So, you need to check if the boot drive is being detected in your computer’s BIOS or not.

Here is how you do it:

1. Reboot your computer.

2. Now press keys F1, F2, ESC, or DEL keys to get to the BIOS Settings.

3. The main window of BIOS Settings will be opened.

4. Here you will see the list of all the devices that your BIOS has detected.

5. The list must contain any hard disk drive that has been linked with the boot settings.

6. If you don’t see your hard disk drive, then shut down your PC immediately.

7. Switch on your PC again.

8. Now you have two options to go for. Either connect another SATA cable to another SATA slot in the motherboard or connect a hard disk drive to another SATA slot.

9. Now check immediately if your hard disk drive is detected or not.

10. If it is, then it is quite clear that either the SATA port or the cable was damaged.

Well, if it is not detected at all, you know that the boot disk has been corrupted or damaged.

Fix 4: Clean RAM Of Your Computer System

The full of dust and dirty RAM can sometimes be the cause of this error. Especially if you have not cleaned it ever since you got your PC. So, you should clean the RAM right away.

Here is how you do it:

1. Shut down your PC.

2. Pull off your PC’s sideboard or unscrew the laptop’s bottom to locate your RAM.

3. Unclamp the space beside your RAM gently.

4. Remove it from its position.

5. Clean the dust off your RAM with a delicate cloth.

6. Put it back into its place.

7. Reboot or restart your PC to check if the error is gone or still there.

Proceed to the next solution if you still see the error.

Fix 5: Active Your Inactive Primary Hard Drive Partition Using Command Prompt

If none of the above solutions seems to be working for you, then you need to go out of your comfort zone and try something big.

Changing the primary hard drive partition as active can solve the error message “Reboot and Select Proper Boot Device”.

So, if you haven’t activated the primary hard drive partition, negate this error once and for all now by tweaking changes using Command Prompt.

Recovery Disk or Windows Installation Media Disk are used in the process. You need to set it as your BIOS primary boot media.

1. Perform all the necessary on-screen instructions to jump to the option of recovering or restoring your PC.

2. Click on any of the given options.

3. A window will open up. Either it will be System Recovery Options if you have Windows 7 or Troubleshooting Screen if you are Windows 8 or Windows 10 user.

4. A list will appear on the window. Choose the Command Prompt.

5. Get into the Command Line: “diskpart” [enter].

6. Enter the command line list disk [enter] option to locate all the disks installed on your system.

7. Open the command line select disk 0.

8. Hit Enter.

9. Now enter the inactive partition or command line list partition 1.

10. Hit Enter again.

11. Enter the command line active [enter] to activate it from its inactive position.

12. Diskpart will notify you that the partition is made active now.

13. Exit the command line window after performing all the important steps.

14. Restart your computer and check if the error message still appears.

Read this: How to open a command prompt in a specific folder?

Fix 6: Set Your BIOS to Default Values

If you have come this far, it probably means that none of the above solutions worked out. Don’t lose hope. Let us go a little deeper and try another couple of solutions.

When your computer’s BIOS is not set to the default values, the stability of your booting system might get disturbed.

This instability later results in the occurrence of the “Reboot and Select Proper Boot Device” error. So, set it to the best default values ASAP.

1. Reboot or restart your PC.

2. Get into your BIOS settings by following the instructions.

3. Look for the option that says load optimal defaults.

4. Complete the loading of the best defaults.

5. Restart your computer.

Fix 7: Disable and Enable the Legacy Boot Feature

Your computer’s BIOS has some features that can turn out to be problematic if you don’t disable or enable them back.

For example, the Legacy Boot feature. The error “Reboot and Select Proper Boot Device” will eventually go away after you disable and enable it.

Here is how you do it:

1. Restart your PC.

2. Get inside your computer’s BIOS Settings.

3. Locate the Legacy Boot option there.

4. You will find this option in the tabs of BIOS.

5. Disable it if this feature is already enabled.

6. Or, enable it if the feature is already disabled.

7. Save changes.

8. Exit the BIOS settings.

9. Restart your computer and check if the error message is still there or not.

Fix 8: Replace Your CMOS Battery If It Is Damaged

Gone this far and still didn’t get the issue resolved? Well, don’t need to panic. All this time, the main culprit can be the damaged CMOS battery. Replace it ASAP if it has been damaged or frayed.

1. Open the computer’s casing.

2. Get into the motherboard.

3. Take out the CMOS battery.

4. Press and hold the Power Button to get rid of residual charge in the meantime.

5. Now replace the old CMOS battery with a new one.

This might ultimately resolve the “Reboot and Select Proper Boot Device” error.

Final Words

Got stuck at the screen saying, “Reboot and Select Proper Boot Device”? Simply use the above-mentioned troubleshooting solutions and the error will go away.

I am pretty sure none of you wants this error to ever come back. So, install the best cleaner on your PC. In this way, no changes in the windows registry database will cause you further problems in the future.

Read this:

• How to fix Discord Not Opening Error?

• How to Fix the High CPU usage problem?

• How to fix video scheduler internal errors?

How to Fix “Windows Resource Protection Could Not Perform The Requested Operation” SFC Scan Error

July 31, 2021 By SoftsFreak Editor Leave a Comment

Have you ever tried to run System File Checker (SFC) only to receive the error message “Windows resource protection could not perform the requested operation”?

Well, it is one hell of a frustrating error message that shows up whenever you try to scan your computer system for corrupted files and other inconsistencies that are potentially responsible for system crashes.

What is SFC Scan?

It is a great, built-in maintenance utility that helps you clean your system from corrupted files and potential malware. This tool comes with all the recent versions of Windows OS for free.

You are always recommended to use the SFC tool whenever Windows freezes, crashes, and all the vital Windows functionalities get disrupted. After finding out the culprits and all the corrupted files, SFC immediately solves them on its own.

Unluckily, if the SFC scan stops working and starts showing the error message “Windows resource protection could not perform the requested operation” none of your issues can be resolved in peace.

You must know that panicking and stressing over the issue is not the solution. Instead, look for all the effective solutions to fix this issue. In this post, we have narrowed down 100% working and doable troubleshooting solutions.

Now, what do we do? Let’s head to the fixes. But before that, you must know the potential causes of the SFC scan error message “Windows resource protection could not perform the requested operation”.

What Are the Causes of “Windows Resource Protection Could Not Perform The Requested Operation” SFC Error?

Microsoft tech-savvies are still unable to pinpoint specific causes. So, the causes for the SFC scan error “Windows resource protection could not perform the requested operation” can be known and unknown too.

However, we have gathered some possible issues that make the SFC scan error message pop on your command’s screen

Here they are. Pay heed to them as they might help you in finding the actual cause and thus resolving the issue.

1. Inconsistencies such as Windows server error.

2. Something is disrupting the SFC tool functionality so the scanning is incomplete in the middle.

3. The Scannow command is not functioning at all.

4. Partition Disk failure.

5. Corrupted or missing Windows files.

6. SFC Scannow is unable to locate the winsxs folders.

7. Improper system architecture

These are the 7 most common causes for the error message of “Windows resource protection could not perform the requested operation” to occur. Although countering this issue isn’t too hard.

Top 8 Ways to Fix “Windows Resource Protection Could Not Perform The Requested Operation” SFC Scannow Error

Are you frustrated by how SFC keeps displaying the same error when you run it over and over again? There’s nothing to worry about!

Please refer to the solutions provided below and you’ll be all set.

Solution 1: Run Your Hard Drive through CHKDSK Scan

Always go with the easy and initial solutions. For example, inspect your hard drive first before trying any other solution. Doing so might just alone solve your issue.

Why? Because if your system’s hard drive is corrupted or has corrupted and damaged files, then SFC Scannow will show the error.

Here is how you perform a CHKDSK scan on the hard drive of your Windows 10 specifically. The steps can differ a bit in other versions.

1. Go to your computer’s search bar.

2. Type “CMD” to open Command Prompt and hit Enter key.

3. Right-click on the Command Prompt option.

4. Select run as administrator.

5. The Command Prompt window will open up.

6. Type chkdsk c:/r [enter] command there.

7. Now hit the Y key to run the CHKDSK scan on restart.

8. Restart your PC now so the scan completes.

Go and check the SFC scan to see if it is running smoothly now.

It isn’t able to work yet. Don’t worry, proceed to the next solution.

Read this: How to open Command Prompt inside a specific folder on Windows?

Solution 2: Run SFC Scannow Using Safe Mode

There are chances that the hard drive is already doing well and the issue can be deeper than that.

This is why you must go above and beyond. If the CHKDSK scan was not sufficient enough to solve the issue. Then try scanning your system using SFC scan in Safe Mode to get rid of the

“Windows resource protection could not perform the requested operation” error message.

Follow these instructions to run SFC Safe Mode:

1. Go to your PC’s search bar.

2. Type MSConfig.

3. Hit Enter key.

4. System Configuration Window will open up on your screen.

5. Locate the boot tab which is right beside the general tab. Click on the boot tab.

6. Look right beneath the boot options, you will see the safe boot. Tick the box beside it right away.

7. Make sure you click on the minimal option beneath the safe boot.

8. Now press the OK and Apply buttons to save changes.

9. Restart your PC.

Now that you have entered Safe Mode, run the SFC Scannow tool again using Command Prompt. Check if it is working or not in Safe Mode. It should work by now. Or if the error is stubborn enough to keep popping up, then simply go for the next solution.

Solution 3: Turn On the Windows Module Installer Service

You must know that Windows services play a huge role in keeping all the functionalities intact. Even if one of their services is disabled, dysfunctional errors like “Windows resource protection cannot perform the requested operation” can show up out of nowhere.

This is exactly why you need to enable the Windows Module Installer service if it has been disabled due to any reason. The Windows Module Installer will successfully catch system bugs that are causing harm to SFC and might solve the problem once and for all.

Here is what you need to do to enable the Windows Module Installer.

1. Open the Run dialogue box by pressing the Windows and R keys together.

2. Go to the Run dialogue box and type “services.msc” there.

3. Hit the OK button.

4. A list with various options will appear.

5. Locate the Windows Module Installer option from there.

6. Right-click on the Windows Module Installer option.

7. Choose to start it.

Now that this crucial functionality has been turned on, try scanning your windows through SFC scan and see if it works smoothly.

Read this: How to fix System Thread Exception Not Handled Error On Windows?

Solution 4: Make Modifications in the Security Descriptors of Winsxs Folder

If the SFC tool fails to get into the Winsxs folder, then it won’t work to fix your corrupted or crashed Windows.

Most of the important updates and files are located in the Winsxs folder which is why it should be accessed by maintenance tools such as SFC. And if that doesn’t happen, then you might meet the error message of “Windows resource protection could not perform the requested operations”.

Don’t worry, this problem is all under your control. All you need to do is manually make modifications in the security descriptors of the Winsxs folder. This shall solve your issue.

Here is how you modify the security descriptors:

1. Go to your search bar.

2. Type Command Prompt and hit Enter key.

3. Open Command Prompt window using run as administrator option.

4. Just when the command prompt window opens up, type “ICACLS C:\Windows\winsxs” [enter] command and press Enter again.

5. Restart your PC so the modification takes effect.

6. Run your system via SFC scannow and check if the error is showing up this time or not.

Move to the next solution if the error is still there. (Don’t lose hope!)

Solution 5: Download the Windows Update Troubleshooter

You never know, Windows Update Troubleshooter might just do the job for you. It is popular for fixing many Windows issues. Let’s just give a shot at this solution.

Here is how you run the Windows Update Troubleshooter tool.

1. Navigate to your web browser.

2. Open the Fix Windows Update errors tab by clicking on the link https://support.microsoft.com/en-us/help/10164/fix-windows-update-errors.

3. Scroll down to locate the section shown in the screenshot.

4. Select the version of Windows you are using.

5. Start downloading Windows Update Troubleshooter by selecting the clickable link.

6. Double-click on the downloaded file now to allow it to run.

7. Keep following the easy on-screen instructions until the process is done.

8. Restart your PC and use the SFC scannow again to check if the error persists. It must be gone by now.

Solution 6: Perform Recovery Commands

The above solutions should have already worked. But if you are still stuck with the error message “Windows resource protection could not perform the requested operation”, then it is time you try something big.

You may run the recovery commands using SFC in the command prompt if the Windows current boot version is up-to-date. Booting into recovery mode and running the SFC scan utility might do the job for you.

Here is how you do it.

1. Restart your PC if it is already turned on using the Power button.

2. Just when your computer is in its boot phase, immediately press the F11 key to get into the Recovery Mode.

3. Or you may also do it via a bootable USB device.

4. Select the Command Prompt from the given tools list. Now hit Run.

5. Command Prompt window will open up.

6. Input the command of “sfc/SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows” [enter] and hit Enter.

7. Wait for the command to be executed and then you may exit the Recovery Mode.

8. Now boot into your Windows desktop normally.

9. Run SFC Scannow to check if it is running fine now.

Solution 7: Always Keep Your Device Driver Updated

Whenever your system crashes and freezes, updating the device driver should be your go-to solution. If you have come this far and still no solution has done its job, then it is time you simply update the device driver.

Follow these instructions:

1. Go to your computer’s search bar.

2. Type device manager and hit Enter key.

3. The Device Manager will be launched.

4. A list of devices will appear. Select the devices that you want to update.

5. Now click on the Search automatically for the updated driver software option.

6. Select Update Driver.

7. Try looking for all the new updates and make sure to update your device driver properly.

Run the SFC scannow and check whether the “Windows resource protection could not perform the requested operation” has disappeared now or not.

Solution 8: Run Startup Repair or Automatic Repair

Even after having made it this far, just having the same issue persist can be frustrating. Relax, the solution which we are going to discuss can resolve the issue 100% once and for all.

Run Automatic Repair or Startup Repair to make the issue disappear forever.

Here are the steps to perform this solution. Refer carefully.

1. Insert the Windows 10 (or any version of Windows you are using) bootable installation to your PC.

2. Restart or reboot your computer.

3. You will be prompted to Press any key to boot from CD or DVD as shown in the screenshot below.

4. Press any key to keep going.

5. Choose your preferred language for further process.

6. Now, look towards the bottom-left of your screen.

7. Click on the Repair your computer option as shown below.

8. Choose an option screen that will appear.

9. Select the Troubleshoot tab from there just like that.

10. Click on the Advanced Options on the same Troubleshoot screen like that.

11. Now look for the Automatic Repair or Startup Repair on the Advanced Options screen.

12. Wait for the changes to take effect and restart your PC.

Now that your computer is repaired on all levels, stay confident that the SFC Scannow will work without the appearance of Windows Resource Protection error.

Let’s Wrap It Up!

There is no way you can disregard SFC Scannow’s importance since it is vital to fixing your Windows working issues. So, you should perform all the troubleshooting solutions from our list above.

We are sorry if you continue to experience the “Windows Resource Protection could not perform the requested operation” error even after trying all of the solutions listed above. Furthermore, we recommend that you perform a fresh install of Windows. We understand that this is very frustrating, but it could potentially solve the problem FOREVER by giving you a fresh start.

Leave a comment to tell us what solution helped you!

• How to Save your Chrome History?

• How to Fix “There was a problem resetting your PC” on Windows?

5 Best Ways to Fix “Discord Awaiting Endpoint” Error on Windows 10

July 30, 2021 By SoftsFreak Editor Leave a Comment

If you love to play online games on PC, you might be familiar with Discord. It is a cool platform to communicate with other gamers via voice chat as well as text. There are different versions for Mac, Android, and iOS as well as for Windows, so you should be able to use it on whichever platform you are using.

Occasionally, you might face an error on Discord Awaiting Endpoint while connecting to Discord. This error will not allow you to establish a connection with the server.

But you don’t need to worry; we are here to guide you on how to fix it. In this guide, we will tell you the complete methods to resolve this issue.

What is Meant By “Discord Awaiting Endpoint Error”?

“Awaiting Endpoint” error on Discord is a network-related issue, which we often face while connecting to the Discord servers.

At times, when you are going to start up with Discord and try to chat with others, you see “Connecting” on your screen, but instantly an error appears on your computer screen.

One of the main reasons behind this annoying stuck-up error is the servers of Discord are down or you are failing to make the connection with a specific server.

Common Errors of Awaiting Endpoint Discord

Below mentioned are the common errors with Awaiting Endpoint on Discord.

Discord Stuck on Connecting.
Discord Server Down.
Discord RTC Connecting.
Discord Awaiting Endpoint Private Call.

Fix Discord Awaiting Endpoint Error from Premiuminfo

Read this: How to Fix Discord Not Opening Error on Windows 10?

5 Best Ways To Fix “Discount Awaiting Endpoint” Error

Here, we are sharing several techniques that might be helpful for you to successfully fix the error. By using the given below methods you will surely fix it.

1. Check Your Internet Connection.

2. Wait For Servers.

3. Changing The Server Region.

4. Use a VPN.

5. Re-install The Discord Application.

Method 1: Check Your Internet Connection & Wi-Fi Settings

A poor internet connection can cause an Awaiting Endpoint error on Discord. To check either your Wi-Fi or internet is working properly, you have to go to any other website or try connecting to any other service from the browser on your computer.

If nothing is working, then it means the problem is your Wi-Fi or internet connection. In most cases, simply rebooting the modem or the router might fix the issue.

But if that is working properly, then we recommend you go to the network dashboard and change all the settings into the default settings.

You can try this method; it will help you to fix the error.

Read this: How to Fix Wi-Fi Keeps Disconnecting Errors on Windows 10?

Method 2: Wait For The Servers

Giving Discord time to fix their servers on their own is another simple way to fix the error. Mostly, this issue fixes itself automatically after a while, so you should give it a couple of hours and then open Discord again to see whether it works.

But if you are in hurry and don’t want to wait for the server to backup, which may take a couple of hours as well, then you should think about changing the server to solve the issue.

If you have decided to change Discord’s server, then that’s what we will discuss in our next method to fix the problem.

Method 3: Changing the Server Location

As we mentioned earlier, one major reason behind Discord’s Awaiting Endpoint error is that the specific host may be down. To provide uninterrupted services and prevent overload on a single server, most of the companies across the globe have several servers at different locations.

Like the others, Discord also has servers in different geographical locations. Whenever your PC sends a request to connect with a server, the request goes to the nearest server to provide the services quickly and without any lag.

If one of the nearest servers is down, changing the server can get you back on track. You may get rid of the error by changing the server settings temporarily. Changing Server helps you to connect to another available new server which fixes this issue. Follow these steps:

1. Open your “Discord” platform.

E PIC-1

2. Go to the “Settings” menu.

3. Scroll down the settings menu to select the “Server Settings”.

4. Click on “Overview” in the left-hand side pane in Server Settings.

5. Click on “Change” in Server Region to change the server location.

Once you have clicked on “Change”, you will see the list of Discord Servers from different regions across the globe.

6. Select one of the closest servers from the given list.

When you select the server from the given list it will ask for confirmation.

7. Click on the “Save Changes” button to connecting with the selected server.

Method 4: Use a Virtual Private Network (VPN)

One way to fix network-related issues is using Virtual Private Network (VPN). VPN helps you to change your Server / IP address and access the geo-restricted contents. To avoid server / IP-related issues use the Virtual Private Network; it will connect to a private network that can help you to connect to a new server in Discord automatically.

Many free and paid VPN applications are easily available in the market. Some of the most popular VPN applications are given below:

CyberGhost VPN
Surfshark VPN
Express VPN
Nord VPN
IpVanish VPN

You can fix the error by using the above-suggested VPN applications; you need to follow these steps:

1. At First “Download VPN” application from the Internet and then “Install” on your PC.

2. Open the installed VPN application and connect to the server.

3. Now, open the Discord application again using VPN.

This may help you in resolving the Awaiting Endpoint error on Discord.

Method 5: Re-Install Discord Application

If you get tired of using all of the above-discussed methods to get rid of the Awaiting Endpoint error on Discord, then you can do the last resort option. Uninstall Discord from your PC and then reinstall it on your PC again.

To properly uninstall the Discord platform, it is not enough to simply delete or transfer its files to the Recycle Bin. For doing this, we need to use the features of Windows Settings.

Follow these steps:

1. Open “Start Menu” by clicking on the Windows icon button on the bottom left corner of your screen.

2. Click on the “Settings” option.

3. Open “System” in the Windows Settings.

4. Search and choose the “Apps & Features” in the System window.

5. Look for Discord and click on the “Un-install” button.

A pop-up window will appear on the screen with a warning message as shown in the above screenshot.

6. Click the “Uninstall” button to confirm the un-installation process.

Discord will be completely removed from your computer in the background mode. In just a few seconds, it will disappear from the list of installed programs.

Read this: How to Fix Discord Update Failed Error?

How to install Discord on Windows 10?

1. Open your web browser and go to www.discordapp.com

2. Click on “Download” in the top-left corner of your screen.

3. Click the “Download Now” button in the next window.

4. The file “DiscordSetup.exe” will appear in your downloads bar, click on the file to open it.

5. Click on the “Run” button, which appears in the pop-up window.

Conclusion:

There may be multiple reasons behind the Awaiting Endpoint Discord error, but hopefully one of the above methods will work for you to get by the problem.

If you have tried all the above methods without success and are still experiencing the Discord Awaiting Endpoint Error, you should contact Discord Support and tell them what is happening with the Discord application.

• How to find Hidden Games on Steam?

• How to Fix PUBG FPS Drop?

• Complete Guide on Escape From Tarkov Interchange Map

11 Ways to Fix “Wi-Fi Connected But No Internet” Error on Windows 10

July 29, 2021 By SoftsFreak Editor Leave a Comment

Wondering here and there to look up the best solutions that would work? Well, you are already in the right place. Stay! So, all of you must have been in a situation where you see your Wi-Fi connection on your device but the internet is not working. Argh!

Extremely frustrating, right? Well, the internet is only a blessing when it is fetching you the desired web pages. Everything starts going downhill once you lose internet access. The error message “Wi-Fi Connected But No Internet” can be linked with many factors such as any network bugs, outdated drivers, or router, etc.

It can be anything disturbing the access to your internet. At first, powering off your computer one to two times might help. If it doesn’t help, then you must know that the issue is deeper than that and you have to perform some serious troubleshooting solutions to get your internet connection up and going.

To help you get back to enjoying your internet services, we have compiled this guide to fix this issue. Continue reading.

Since the causes of the “Wi-Fi Connected But No Internet” issue on your computer might vary. You have to consider all the troubleshooting solutions listed in this article. Be positive and keep going, fellows!

What Does Error Message “Wi-Fi Connected But No Internet” Mean on Windows?

You might already relate to those Windows OS users on wireless connection having a “Wi-Fi Connected But No Internet” error message over their internet access icon.

If you do, you should know what this issue means before troubleshooting it.

It is a teeny-tiny, yellow warning triangle that has a bold black exclamatory sign. This error means that your device is successfully connected to the Wi-Fi network via router or modem but something is blatantly blocking the internet access.

It gets super frustrating when your device has everything in order, but the internet’s unavailability from the router makes things hard.

Now that you have a fair understanding of this problem, let’s quickly navigate to the solutions. But before that, why not see some possible culprits for this internet issue.

Let’s go!

Wifi connected but no internet from techsupport

What Are The Causes Of Error Message “Wi-Fi Connected But No Internet” On Windows?

Internet access issues can sometimes be difficult to characterize because their causes are not always clear. However, according to user reports, we have narrowed down the following possible reasons for the “Wi-Fi Connected But No Internet” error message.

Since your Windows won’t tell you the exact cause other than showing the error popup. So, it is your job to identify your issue and then find a solution for it from the list.

Now, let’s get straight to the causes of the internet connectivity errors:

1. Faulty or damaged Wi-Fi adaptor.

2. Incorrect IP address.

3. Corrupted DNS cache

4. Faulty router or modem.

5. Outdated wireless drivers.

6. Failed wireless network.

7. Incorrect DNS configuration.

8. Something is wrong at Internet Service Provider’s (ISP) end.

9. Antivirus programs are blocking internet access.

These are the 9 most common causes for the “Wi-Fi Connected But No Internet” error message. Any of them can be the main culprit for the unavailability of the internet.
With the help of these, it will be easier to troubleshoot the targeted problem.

Here comes the main section of this article. Now, let’s take you to the troubleshooting adventure.

Read this: How to Save Chrome History in Windows 10?

Is Your Device is Disconnected or the Entire Network?

You are always recommended to use the basic and the easiest way out first.

In the prerequisite, you must verify whether the error message “Wi-Fi Connected But No Internet” appears on your device or every other device on your Wi-Fi network. This will save you time and you will only have to perform the limited solution.

Here is how you confirm if all devices are connected to a mutual Wi-Fi network or just your device.

Simply grab your phone or switch on to another PC. Now go to the Internet Access icon and connect to your Wi-Fi network. If the same error message of “Wi-Fi Connected But No Internet” shows up on all of your devices, then there is probably something up with your router. Or maybe your ISP is down.

On the other hand, if only your device seems to be affected by the error message, then you must have DNS issues, faulty drivers, adapter issues, etc.

Keeping the above two cases in mind, we have split the guide into two sections where you will find solutions for both categories of the same internet access issue. Get going!

Read this: How to Fix Wifi Keeps Disconnecting Errors on Windows 10?

11 Best Troubleshooting Ways To Fix “Wi-Fi Connected But No Internet” Error?

We believe that you have already figured out the possible cause. If yes, then select the suitable solution from the list and apply it. You will be free from this draining issue.

Also, no problem if you haven’t figured out the cause. Just go through the entire troubleshooting guide and apply all the solutions. None of the solutions requires you to be tech-savvy.

Apply the following solutions for the error message “Wi-Fi Connected But No Internet” on all the devices of your Wi-Fi network:

Solution 1: Reboot Your Router or Modem

When you see that the same error message has taken over all the devices on your Wi-Fi network, go to reset or reboot your router/modem.

Here is how you do it:

1. Power down your router/modem.

2. Unplug it/them from the wall.

3. Wait for a minute and plug the router back if you only have a router. Or, if you have a modem then plug it first.

4. Once everything is put back into place, power up your device(s) after 15 minutes.

5. Check if the same error is showing up on your devices or not.

Solution 2: Check If There Is Internet Service Outage

Another reason for the unavailability of internet access despite network connectivity is the internet outage at your ISP’s end.

The network can be overloaded or your ISP has simply cut down the service. To check more, navigate your provider’s Facebook page using your cellular data and determine the actual cause.
Or you may also contact your ISP directly to keep track.

Solution 3: Perform Entire Network Reset

If the problem persists on all the devices of your Wi-Fi network, then it is time to reset your entire Wi-Fi network. We know that it is frustrating and time taking. But once this solution is done, you are all set for a fresh start.

Noteworthy details: Note that this solution will bring everything back to the default state and you will need to input your network’s password again to set up the network.

Here are the steps to reset your entire wireless network.

1. Go to your computer’s search menu.

2. Type Settings and launch the Settings app.

3. Open network & internet option.

4. Move to the left-hand menu list and click on the Status.

5. Scroll down to locate the Network Troubleshooter option.

6. There will be a list of all Networks. (Ethernet, Wifi or all)

7. Click on Wifi as Network troubleshooting, it will start detecting the problems.

8. Let it diagnose, and then it will give you follow-up tasks to perform all the easy on-screen instructions.

9. Now use your taskbar to connected to your Wi-Fi network and check if the same error is still appearing. It will most likely be disappeared.

How to Fix Wi-Fi Connected But No Internet” on a single device?

Apply the following solutions if you are seeing the error message “Wi-Fi Connected But No Internet” on a single device of your Wi-Fi network:

Solution 4: Restart or Reboot Your PC

If you got lucky enough, you might have all the temporary glitches resolved just by simply restarting or rebooting your device.

Sometimes an annoying bug enters your system which you can easily eradicate with a reboot. Especially if you are using a Wi-Fi network. If this solution doesn’t work, you move to the next.

Solution 5: Diagnose via Windows Network Troubleshooter

So, the error message “Wi-Fi Connected But No Internet” didn’t go away with the reboot? Don’t worry! There are so many solutions lined up.

Another easy fix is running the built-in Windows Troubleshooter utility. Many network issues seem to go away with this solution.

Here is how you perform Network Troubleshoot.

1. Go to your computer’s search bar.

2. Type settings and hit Enter key.

3. Launch Settings.

4. Select the network & internet option.

5. Move towards the left-hand menu and find the Status option there.

6. Click on the Status.

7. Now select the Network Troubleshooter option as shown in the screenshot below.

8. Let this utility diagnose all the network issues.

Get back to your computer and check if the internet is available or not. Jump to the next solution if the situation remains the same.

Solution 6: Keep Your Network Adapter Driver Updated

Just like updating your Windows OS to an updated version is necessary, you must keep the hardware drivers updated as well for better communication between the router and your device.

Follow these steps to upgrade your driver thus Network Adapter Driver.

1. Type Device Manager in your PC’s search menu.

2. Locate the Network Adapters option in the list.

3. Place the cursor there to expand it.

4. From the expanded list, locate the Wireless option.

5. Right-click on the Wireless option.

6. Select Update Driver, just like shown in the screenshot.

The network drivers will be updated and you might get rid of the error message of “Wi-Fi Connected But No Internet”.

However, if your drivers are not updated after applying the mentioned steps, it means your system requires a manual installation. Do it on your own or have it done by a tech expert. It is all up to you.

Solution 7: Turn Off the Fast Startup Feature

Windows OS comes with a built-in feature of Fast Startup feature that quickly shuts down and powers on your PC. When you have this feature enabled on your PC, it might disrupt the communication between two devices.

This is why you need to disable it right away to remove the slightest doubts.

Here is how you disable/turn off the Fast Startup feature to get rid of the “Wi-Fi Connected But No Internet” error message.

1. Press the Windows key and R key together to launch the Run utility.

2. Type “powercfg.cpl” in the Run search bar and hit Enter key.

3. It will bring up Power Options on your screen.

4. Move towards the left-side menu to locate choose what power buttons do option. Click on it.

5. Go to the definition section now.

6. Click on the change settings currently unavailable option.

7. Now navigate to the section of shutdown settings.

8. The option for the Fast Startup feature will appear.

9. Remove the checkmark of the Fast Startup feature and hit the Save button as shown below.

10. Restart your PC and connect to your Wi-Fi network to see if the issue persists.

This solution didn’t help? Don’t worry, move to the next one.

Solution 8: Turn Off All the Security Software Programs

The updates from some of the security software programs like Avast can block internet access out of nowhere. It has been reported many times by different users.

The glitch updates block some websites or sometimes the entire internet connection. Sometimes running your system through scan can also bring such unwelcomed internet issues. So, it is better to disable such software. And even better to uninstall them.

Solution 9: Flush Domain Name System (DNS) Cache

Any bugs or glitches brought about by malicious or viral attacks can corrupt your DNS. Later on, those corrupted DNS cache files disrupt the IP address and your IP address can be minimally mismatched.

A mismatched or incorrect IP address directly leads you to the unavailability of the internet whether your Wi-Fi network is connected or not. It is also the reason to bring a “Wi-Fi Connected But No Internet” error message.

This is why you need to flush your DNS cache. Here is how you do it:

1. Go to your computer’s search menu.

2. Type Command Prompt and hit Enter key.

3. Right-click on the command prompt and choose the “run as an administrator” option.

4. A command prompt window will open up.

5. Type these commands in the window as shown in the screenshot. Make sure to hit Enter key after inputting each command.

ipconfig /flushdns [Enter].

ipconfig /release [Enter].

ipconfig /renew [Enter].

6. Close the command prompt window by the exit.

7. Restart your PC and connect to your Wi-Fi network. The issue will most probably be already disappeared.

Read this: How to Open Command Prompt in any Folder?

Solution 10: Configure DNS Server Settings

Your DNS settings may have been configured incorrectly. Such random incorrect configurations are responsible for errors such as “Wi-Fi Connected But No Internet”.

Here is how you change your DNS server address to make things right:

1. Open the Run utility by pressing the Windows key and R key simultaneously.

2. Now go to the Run search menu.

3. Type “control /name Microsoft.NetworkAndSharingCenter” in the text bar and hit Enter key.

4. Click on the Change Adapter Settings on the top left corner.

5. Left-click on Wi-Fi.

6. Open Properties.

7. Go to the new window and click on Internet Protocol Version 4 (TCP/IPv4), Select the Properties button down there.

8. It will bring another window showing how your DNS server and IP address are obtained.

9. Now change its settings to Use the Following DNS Server Address down there.

10. Input a preferred DNS server address of 8.8.8.8 and for an alternate DNS server address, you may input 8.8.4.4.

11. Finally hit the OK button to save changes.

Restart your PC and connect to your wireless network. Your internet will be up and running this time.

However, if it doesn’t work, try the last troubleshooting solution on our list.

Solution 11: Check If Your Device Has Valid IP Address

One of the biggest factors that bring the error “Wi-Fi Connected But No Internet” is the invalid IP address. This is why you have to check the validity of your IP address to restore internet access.

Here are the steps to do it.

1. Move towards the bottom right corner and click on the network icon.

2. Select Open Network & Internet Settings option.

3. Select Change Adapter Options.

4. Single-click on your network. (Wi-Fi)

5. A new window will open up.

6. Click on the Properties.

7. Locate the Internet Protocol Version 4 entry and double-click on it.

8. Make sure that both of the IP addresses and DNS server addresses are the same and hit Enter key.

Connect to your Wi-Fi network and check if it is working this time. Your internet should work this time.

Final Thoughts:

Remember that there is not a constant or a single solution to fix the error message “Wi-Fi Connected But No Internet”. You are recommended to apply all the above-mentioned troubleshooting solutions in our guide to fix the software issues. While you must get in touch with an expert technician if the issue is linked to any hardware damage. They will inspect the network and assist you further.

Happy troubleshooting!

9 Ways to Fix “File Explorer Not Responding” Error On Windows 10

July 26, 2021 By SoftsFreak Editor Leave a Comment

File Explorer is a useful tool that gives you access to manage your A to Z files on your hard drive. Being that said, this management tool is a must-have tool for you to quickly navigate your recent or older files where you might want to tweak some changes.

So, when this management tool stops responding, you run into a lot of frustrating issues. Your browsing gets badly disrupted and you end up questioning and cursing your computer.

Instead of being stuck with your frozen File Explorer, we are here to help you. In this article, we have put together some effectively working troubleshooting solutions.

Whenever your File Explorer stops responding on your Windows 10 PC, apply the mentioned solutions and you will most likely have the issue resolved.

Here is a noteworthy detail for you. File Explorer is also known as Windows Explorer. Don’t get confused between their names as they are the same thing with a slight name change. File Explorer is for newer Windows versions while older versions have this feature as Windows Explorer. So, they carry the same functions.

What is File Explorer?

File Explorer, previously known as Windows Explorer in the older Microsoft Windows version is a system management freeze tool. This built-in file managing application was incorporated in Windows from Microsoft Windows 95 update.

Ever since this feature got released, it helped millions of users to access and navigate easily to their files, drives, and folder residing on their system.

It has a user-friendly graphical interface which can be easily obtained by going on the taskbar.

Before we go forward to explore our File Explorer or Windows Explorer troubleshooting guide. Let’s go through some possible causes for File Explorer not responding.

File explorer not responding always. from windows

Why File Or Windows Explorer Not Responding On Windows 10?

Unfortunately, there is no definite or fixed cause for this annoying issue to show up. The main source or reason can be anything.

Down there, we have listed some of the most commonly reported causes for Windows Explorer not responding. They are based on the user reports on multiple tech forums using Windows 10.

1. You Might Have Changed Your Display Settings

According to many users on Microsoft forums, changes in the display settings can easily cause distortion and disturbance in the File Explorer tool.

For example, you may have changed the font size and permitted different applications to make changes to your display settings.

If that’s the case, reverting is the best option.

2. Windows Explorer History is Clogged

Sometimes the File Explorer tool on your Windows 10 gets so overcrowded that it becomes clogged.

This later causes the File Explorer to behave abnormally and stops responding.

You may get rid of it by simply clearing the history.

3. Using Outdated Windows 10 Version

If you miss out on updating your Windows 10 OS, you might run into different existing issues and security holes.

Outdated versions also stunt your File Explorer to work at all. That’s why an immediate upgrade is crucial.

4. System Files Are Problematic

When there is something wrong with your system files, File Explorer usually suffers. Problematic system files freeze your Windows Explorer and your files are no longer your control.

5. Insufficient Space on Your System Drive

When there is not enough space on your system drive, so many functionalities on your system including File Explorer freezes. The solution for it is in our guide.

Top 9 Best Ways to Fix File Explorer Not Responding Windows 10 Error

Now that so many possible causes are right in front of you, troubleshooting would be a lot easier.

Here is a checklist of troubleshooting methods to resolve the issue of File Explorer not responding. This guide is primarily for Windows 10 users. Continue reading to get out of the mess.

Method 1: Wipe Out the File Explorer History

We have already mentioned in the causes section how overcrowded history can disturb the File Explorer performance. Fixing this issue will require you to remove its history.

Don’t know how to do it? Simply refer to the following steps to remove File Explorer history.

1. Launch the Run utility by pressing Windows and R keys together.

2. Type Control.

3. Hit the OK button.

4. Now make sure you set the viewing mode to Large Icons.

5. Select File Explorer Options from the list.

6. A new properties window will open. Here you need to check the listed items and click on the Clear button.

7. Now restart your computer and check if Windows Explorer responds now.

Method 2: Modify Your Display Settings

Modifying or reverting your display settings can get a little bit bizarre. Although it is an effective solution for solving file explorer issues. Moreover, users also reported that simply modifying the display layout settings did well for them.

Here are the steps to revert your display settings:

1. Go to the Windows logo corner on the display screen of your PC.

2. Go to the Settings app now.

3. Open the System option.

4. Stay on the Default display tab.

5. Now set the size of the text, apps, and all other items to exactly 100% or whatever your Windows suggests to you. It will be done under the Scale and Layout option.

6. Now restart your PC and check if you can access Windows Explorer again or not.

Method 3: Restart the File Explorer in the Task Manager (Automatically)

The above two are the most helpful fixes that will eventually solve your issue. However, if the file explorer issue does not seem to be leaving any soon. Then you are required to dive for more solutions.

Restarting and rebooting always help when it comes to Windows management tool issues.

First, you need to restart your File Explorer using task manager automatically on your Windows 10 PC.

Here is how you do it.

1. Go to the taskbar on your screen.

2. Type Task Manager and hit Enter.

3. Task Manager will be launched. You may directly access Task Manager by right-clicking on the “type here to search bar” on your PC.

4. Change the settings to compact mode and click on the More details option there.

5. Open the default Process tab.

6. Select the File/Windows Explorer option.

7. The Restart button will now be visible. Click on it.

8. The Windows or File Explorer will begin to restart. All the items on your taskbar will disappear for a while so don’t be scared.

9. Let your PC restore to a normal state.

10. Now check if you can use File Explorer on your Windows 10 PC.

Method 4: Restart the File/Windows Explorer Using Command Prompt (Manually)

Sometimes the automated way of restarting your File Explorer doesn’t go as planned. At such instants, you level up the restarting game by using Command Prompt.

It is a manual way to restart your Windows 10 PC.

Here are the steps to do.

1. Launch the Run utility by pressing the Windows key and R key together.

2. Type cmd in the Run search.

3. Hit Ctrl + Shift + Enter keys.

4. It will launch the Command Prompt window with administrator permission.

5. To disable or stop the File Explorer first, input the following command.

taskkill /f /im explorer.exe

6. Hit Enter so the command is executed.

7. Now to restart the Windows or File Explorer, simply input the following command. And make sure to hit Enter again so the command is executed.

start explorer.exe

8. Close the Command Prompt window by inputting exit.

9. Restart your PC and check if the File Explorer is responding now or not.

If this method of restarting also doesn’t work out, then go for the following one. You never know which one works for you. So, try them all.

Method 5: Use a Batch File to restart the explorer.exe Process

It is completely okay if none of the above solutions did the job for you. You still have got plenty of quick solutions left.

One thing you can try is making a batch (.bat) file and processing it with administrative-level privileges. Doing so can resolve your File Explorer issue on Windows 10 once and for all.

Here is how you use a batch (.bat) file to restart the explorer.exe process.

1. Go to the empty space on your Desktop and right-click there.

2. Click on New.

3. Select a Text document as shown in the screenshot.

4. Rename the file with Windows or File Explorer. Make sure to open the file with any notepad app.

5. Type the text below in that blank document. Or it is easy to just copy/paste it.

taskkill /f /IM explorer.exe

start explorer.exe

exit

6. Go up and click on the File option there.

7. Select Save As.

8. Choose the file type by clicking on the All Files option.

9. Now the name the file as Restart Explorer.bat

10. Click Save.

11. Close the document and go to your Desktop again.

12. Right-click on the recently saved file Restart Explorer.bat.

13. Click on the option Run as Administrator as shown in this screenshot.

14. Navigate to your File Explorer and check if it is responding now.

Noteworthy takeaway: You can keep that batch (.bat) file saved in your PC to use it again.

Method 6: Free Up Some Drive Space on Your Windows 10 PC

When your system drive or C drive is overcrowded, it can cause a lot of disturbance in other functionalities including the File Explorer tool.

It is always recommended to make some space on the C drive so all the functions are carried out smoothly.

Here are two recommended ways to free up space when File Explorer is not responding on your Windows 10 PC.

A. Delete files using Storage Sense

1. Go to the start menu and select Settings.

2. Open System.

3. Click on Storage

3. Turn on Storage Sense so all the unnecessary items on your drive get removed automatically.

4. For that, navigate to Configure Storage Sense or run it now how we free up space automatically option.

5. Click on Clean now.

B. Uninstall unwanted apps

You can simply go on an uninstallation spree if you have too many unwanted apps lying here and there. They consume huge space.

Method 7: Perform the System File Scan using Command Prompt

Gone this far and still haven’t got your issue resolved? Don’t worry. You are yet to explore a couple of methods or even more.

One of them is simply running the system file checker scan. It fixes many stubborn issues. Here is how you do it.

1. Launch the Run utility by hitting Windows and R keys together.

2. Type cmd

3. Hit Ctrl + Shift + Enter keys.

4. Command Prompt window will be launched with administrator permissions.

5. Type the command sfc /scannow and hit Enter so the command gets executed.

6. Let the System Checker scan now you are good to go.

Method 8: Update Your Windows 10 Versions

Windows Explorer or File Explorer not responding can get annoying. If you have tried everything above and still didn’t have it resolved. Then probably you have missed out on the most important fix which is none other than upgrading your Windows 10 PC with the latest versions.

Here is how you do it.

1. Go to the start menu.

2. Open Settings.

3. Select Update & Security.

4. Stay in the Windows Update button.

5. Hit the Check for Updates button.

6. If you see any new updates uninstalled, click on the install button.

Method 9: Scan Your PC for Malware Attacks

Several issues can navigate your system when it is under malware attack. To be sure of such things, run your Windows 10 for viruses and malware freeze tool or antivirus software.
Who knows? You might just have your File Explorer not responding issue resolved.

Conclusion

That’s all, folks. Here you have the top 9 effective troubleshooting solutions to fix File Explorer or Windows Explorer not responding. It is such a crucial tool.
Apply the above-mentioned fixed to make the File Explorer tool functional again. Good luck!

Related articles

• How to fix WiFi Keeps Disconnecting Issues on Windows?

• How to fix modern Setup Host & High CPU Usage Errors?

• How to change the default installation folder on Windows 10?